0 £0.00
products in your basketto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
To basket
Quote Me
Checkout
0
Bostitch

Bostitch SB-HC50FN Pneumatic Concrete Block Nailer 20-50mm Nails

Category Nailers & Staple Guns
The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg. The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg.
The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg. The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg.
The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg. The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg.
The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg. The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg.
The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg. The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg.
Bostitch

Bostitch SB-HC50FN Pneumatic Concrete Block Nailer 20-50mm Nails

Product Code: BOSSBHC50FN
Category Nailers & Staple Guns
Manufacturer Bostitch
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Specifications

Weight

4.15kg

Catalog Page Number

496

Brand

Bostitch

Categories

Power Tools

Category

Nailers & Staple Guns

Country of Origin

Taiwan

Form

Pneumatic Nailers

Input Power

Pneumatic

Manufacturer

Bostitch

Type

Nailers & Staple Guns

Description

The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds.
It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.

Specifications:

Magazine Capacity: 100 nails.
Fires: HCFN Series: 20-50mm.
Operating Pressure: 70-100 PSI, 5-7bar.
Weight 1.98kg.
Select options to purchase. Prices from
£251.02 Pack of 1
/
incl. VAT £301.22
RRP £291.67
14%
- +
Add to favourites
Compare
Bostitch

Bostitch SB-HC50FN Pneumatic Concrete Block Nailer 20-50mm Nails

Category Nailers & Staple Guns
The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg. The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg.
The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg. The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg.
The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg. The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg.
The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg. The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg.
The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg. The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.Specifications:Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg.
Bostitch

Bostitch SB-HC50FN Pneumatic Concrete Block Nailer 20-50mm Nails

Product Code: BOSSBHC50FN
Category Nailers & Staple Guns
Manufacturer Bostitch
Select options to purchase. Prices from
£251.02 Pack of 1
/
incl. VAT £301.22
RRP £291.67
14%
- +
Add to favourites
Compare
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Description

The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds.
It is not recommended this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks.

Specifications:

Magazine Capacity: 100 nails.
Fires: HCFN Series: 20-50mm.
Operating Pressure: 70-100 PSI, 5-7bar.
Weight 1.98kg.

Specifications

Weight

4.15kg

Catalog Page Number

496

Brand

Bostitch

Categories

Power Tools

Category

Nailers & Staple Guns

Country of Origin

Taiwan

Form

Pneumatic Nailers

Input Power

Pneumatic

Manufacturer

Bostitch

Type

Nailers & Staple Guns

Kyocera
Ricoh
HP
Samsung
Fellowes
Black n Red
Leitz
Rexel
ZOLL
Renz
Cardiac Science
HSM SECURIO
SureSan
SEARCH ×