Cookie Consent by FreePrivacyPolicy.com
0 £0.00
products in your basketto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
To basket
Quote Me
Checkout
0
Hultafors

Hultafors 207 Steel Pinch Bar 400mm (16in)

Category Builder's Tools
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in) The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in)
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in) The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in)
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in) The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in)
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in) The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in)
Hultafors

Hultafors 207 Steel Pinch Bar 400mm (16in)

Product Code: HUL207400
Category Builder's Tools
Manufacturer Hultafors
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Specifications

Brand

Hultafors

Categories

Hand Tools

Category

Builder's Tools

Country of Origin

Taiwan

Form

Pinch Bar

Length

400mm

Manufacturer

Hultafors

Type

Builder's Tools

Description

The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.

1 x Hultafors 207 Steel Pinch Bar 400mm (16in)
Select options to purchase. Prices from
£12.97 Pack of 1
/
incl. VAT £15.56
RRP £17.71
27%
- +
Add to favourites
Compare
Hultafors

Hultafors 207 Steel Pinch Bar 400mm (16in)

Category Builder's Tools
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in) The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in)
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in) The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in)
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in) The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in)
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in) The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in)
Hultafors

Hultafors 207 Steel Pinch Bar 400mm (16in)

Product Code: HUL207400
Category Builder's Tools
Manufacturer Hultafors
Select options to purchase. Prices from
£12.97 Pack of 1
/
incl. VAT £15.56
RRP £17.71
27%
- +
Add to favourites
Compare
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Description

The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.

1 x Hultafors 207 Steel Pinch Bar 400mm (16in)

Specifications

Brand

Hultafors

Categories

Hand Tools

Category

Builder's Tools

Country of Origin

Taiwan

Form

Pinch Bar

Length

400mm

Manufacturer

Hultafors

Type

Builder's Tools

Kyocera
Ricoh
HP
Samsung
Fellowes
Black n Red
Leitz
Rexel
ZOLL
Renz
Cardiac Science
HSM SECURIO
SureSan
SEARCH ×