0 £0.00
products in your basketto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
To basket
Quote Me
Checkout
0
StarTech.com

StarTech.com 10m LC to SC OS2 Single Mode Duplex Fibre Optic Cable

Category Network Cables
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability. OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability. OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability. OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability. OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability. OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability. OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability. OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
StarTech.com

StarTech.com 10m LC to SC OS2 Single Mode Duplex Fibre Optic Cable

Product Code: 8ST10435158
Category Network Cables
Manufacturer StarTech.com

Document
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Specifications

Lead Time

1

Brand

StarTech.com

Cable Jacket

Low Smoke Zero Halogen

Cable Length

10 metre

Categories

Networking

Category

Network Cables

Colour

Yellow

Connector Type

Fibre Optic LC Duplex to Fibre Optic SC Duplex

Dimensions

25x10mmx10m

Form

Fibre Optic Cable

Manufacturer

StarTech.com

Type

Network Cables

Warranty

Lifetime Warranty

Weight

78g

Description

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.

Compatibility
This 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.

Engineered for Optimal Performance
Precision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.

LSZH Cable Jacket
Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.

Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
Select options to purchase. Prices from
£20.36 Pack of 1
/
incl. VAT £24.43
RRP £23.09
12%
- +
Add to favourites
Compare
StarTech.com

StarTech.com 10m LC to SC OS2 Single Mode Duplex Fibre Optic Cable

Category Network Cables
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability. OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability. OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability. OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability. OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability. OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability. OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability. OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
StarTech.com

StarTech.com 10m LC to SC OS2 Single Mode Duplex Fibre Optic Cable

Product Code: 8ST10435158
Category Network Cables
Manufacturer StarTech.com

Document
Select options to purchase. Prices from
£20.36 Pack of 1
/
incl. VAT £24.43
RRP £23.09
12%
- +
Add to favourites
Compare
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Description

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.

Compatibility
This 9/125µm Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.

Engineered for Optimal Performance
Precision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.

LSZH Cable Jacket
Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.

Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.

Specifications

Lead Time

1

Brand

StarTech.com

Cable Jacket

Low Smoke Zero Halogen

Cable Length

10 metre

Categories

Networking

Category

Network Cables

Colour

Yellow

Connector Type

Fibre Optic LC Duplex to Fibre Optic SC Duplex

Dimensions

25x10mmx10m

Form

Fibre Optic Cable

Manufacturer

StarTech.com

Type

Network Cables

Warranty

Lifetime Warranty

Weight

78g

Kyocera
Ricoh
HP
Samsung
Fellowes
Black n Red
Leitz
Rexel
ZOLL
Renz
Cardiac Science
HSM SECURIO
SureSan
SEARCH ×