0 £0.00
products in your basketto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
To basket
Quote Me
Checkout
0
Trend

Trend 13/30 x 1/2 TCT Radius Cutter 12.7mm Radius

Category Router Bits & Accessories
These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm
These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm
These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm
These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm
These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm
These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm
Trend

Trend 13/30 x 1/2 TCT Radius Cutter 12.7mm Radius

Product Code: TRE133012TC
Category Router Bits & Accessories
Manufacturer Trend
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Specifications

Catalog Page Number

601

Brand

TREND

Categories

Power Tool Accessories

Category

Router Bits & Accessories

Country Of Origin

Taiwan

Cut Depth

15.9mm

Cut Diameter

25.4mm

Form

Radius & Cove Cutters

Manufacturer

TREND

Radius

12.7.0mm

Shank

1/2in

Type

Router Bits & Accessories

Description

These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.

These cutters are suitable for use on all natural timbers and man-made boards.

TC.
1/2in Shank

R = 12.7 mm
D = 25.4 mm
C = 15.9 mm
Select options to purchase. Prices from
£60.03 Pack of 1
/
incl. VAT £72.04
RRP £86.24
30%
- +
Add to favourites
Compare
Trend

Trend 13/30 x 1/2 TCT Radius Cutter 12.7mm Radius

Category Router Bits & Accessories
These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm
These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm
These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm
These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm
These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm
These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.These cutters are suitable for use on all natural timbers and man-made boards.TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm
Trend

Trend 13/30 x 1/2 TCT Radius Cutter 12.7mm Radius

Product Code: TRE133012TC
Category Router Bits & Accessories
Manufacturer Trend
Select options to purchase. Prices from
£60.03 Pack of 1
/
incl. VAT £72.04
RRP £86.24
30%
- +
Add to favourites
Compare
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Description

These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames.

These cutters are suitable for use on all natural timbers and man-made boards.

TC.
1/2in Shank

R = 12.7 mm
D = 25.4 mm
C = 15.9 mm

Specifications

Catalog Page Number

601

Brand

TREND

Categories

Power Tool Accessories

Category

Router Bits & Accessories

Country Of Origin

Taiwan

Cut Depth

15.9mm

Cut Diameter

25.4mm

Form

Radius & Cove Cutters

Manufacturer

TREND

Radius

12.7.0mm

Shank

1/2in

Type

Router Bits & Accessories

Kyocera
Ricoh
HP
Samsung
Fellowes
Black n Red
Leitz
Rexel
ZOLL
Renz
Cardiac Science
HSM SECURIO
SureSan
SEARCH ×