Cookie Consent by FreePrivacyPolicy.com
0 £0.00
products in your basketto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
To basket
Quote Me
Checkout
0
Trend

Trend 3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm

Category Router Bits & Accessories
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/01 x 1/4 TCT Two Flute Cutter has the following specification:D: 4mm (5/32in)C: 11mmOL: 65mmShank Diameter: 1/4in The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/01 x 1/4 TCT Two Flute Cutter has the following specification:D: 4mm (5/32in)C: 11mmOL: 65mmShank Diameter: 1/4in
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/01 x 1/4 TCT Two Flute Cutter has the following specification:D: 4mm (5/32in)C: 11mmOL: 65mmShank Diameter: 1/4in The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/01 x 1/4 TCT Two Flute Cutter has the following specification:D: 4mm (5/32in)C: 11mmOL: 65mmShank Diameter: 1/4in
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/01 x 1/4 TCT Two Flute Cutter has the following specification:D: 4mm (5/32in)C: 11mmOL: 65mmShank Diameter: 1/4in The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/01 x 1/4 TCT Two Flute Cutter has the following specification:D: 4mm (5/32in)C: 11mmOL: 65mmShank Diameter: 1/4in
Trend

Trend 3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm

Product Code: TRE30114TC
Category Router Bits & Accessories
Manufacturer Trend
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Specifications

Catalog Page Number

598

Brand

TREND

Categories

Power Tool Accessories

Category

Router Bits & Accessories

Country of Origin

Taiwan

Cut Depth

11mm

Cut Diameter

4.0mm

Form

Two Flute Cutters

Manufacturer

TREND

Shank

1/4in

Type

Router Bits & Accessories

Description

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.

Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

This Trend 3/01 x 1/4 TCT Two Flute Cutter has the following specification:

D: 4mm (5/32in)
C: 11mm
OL: 65mm
Shank Diameter: 1/4in
Select options to purchase. Prices from
£19.79 Pack of 1
/
incl. VAT £23.75
RRP £29.04
32%
- +
Add to favourites
Compare
Trend

Trend 3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm

Category Router Bits & Accessories
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/01 x 1/4 TCT Two Flute Cutter has the following specification:D: 4mm (5/32in)C: 11mmOL: 65mmShank Diameter: 1/4in The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/01 x 1/4 TCT Two Flute Cutter has the following specification:D: 4mm (5/32in)C: 11mmOL: 65mmShank Diameter: 1/4in
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/01 x 1/4 TCT Two Flute Cutter has the following specification:D: 4mm (5/32in)C: 11mmOL: 65mmShank Diameter: 1/4in The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/01 x 1/4 TCT Two Flute Cutter has the following specification:D: 4mm (5/32in)C: 11mmOL: 65mmShank Diameter: 1/4in
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/01 x 1/4 TCT Two Flute Cutter has the following specification:D: 4mm (5/32in)C: 11mmOL: 65mmShank Diameter: 1/4in The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/01 x 1/4 TCT Two Flute Cutter has the following specification:D: 4mm (5/32in)C: 11mmOL: 65mmShank Diameter: 1/4in
Trend

Trend 3/01 x 1/4 TCT Two Flute Cutter 4.0 x 11mm

Product Code: TRE30114TC
Category Router Bits & Accessories
Manufacturer Trend
Select options to purchase. Prices from
£19.79 Pack of 1
/
incl. VAT £23.75
RRP £29.04
32%
- +
Add to favourites
Compare
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Description

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.

Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

This Trend 3/01 x 1/4 TCT Two Flute Cutter has the following specification:

D: 4mm (5/32in)
C: 11mm
OL: 65mm
Shank Diameter: 1/4in

Specifications

Catalog Page Number

598

Brand

TREND

Categories

Power Tool Accessories

Category

Router Bits & Accessories

Country of Origin

Taiwan

Cut Depth

11mm

Cut Diameter

4.0mm

Form

Two Flute Cutters

Manufacturer

TREND

Shank

1/4in

Type

Router Bits & Accessories

Kyocera
Ricoh
HP
Samsung
Fellowes
Black n Red
Leitz
Rexel
ZOLL
Renz
Cardiac Science
HSM SECURIO
SureSan
SEARCH ×