0 £0.00
products in your basketto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
To basket
Quote Me
Checkout
0
Trend

Trend 3/61 x 1/4 TCT Two Flute Cutter 10.0 x 25mm

Category Router Bits & Accessories
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in
Trend

Trend 3/61 x 1/4 TCT Two Flute Cutter 10.0 x 25mm

Product Code: TRE36114TC
Category Router Bits & Accessories
Manufacturer Trend
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Specifications

Catalog Page Number

598

Brand

TREND

Categories

Power Tool Accessories

Category

Router Bits & Accessories

Country Of Origin

Taiwan

Cut Depth

25mm

Cut Diameter

10.0mm

Form

Two Flute Cutters

Manufacturer

TREND

Shank

1/4in

Type

Router Bits & Accessories

Description

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.

Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:

D: 10mm (25/64in)
C: 25mm
OL: 57mm
Shank Diameter: 1/4in
Select options to purchase. Prices from
£24.68 Pack of 1
/
incl. VAT £29.62
RRP £35.44
30%
- +
Add to favourites
Compare
Trend

Trend 3/61 x 1/4 TCT Two Flute Cutter 10.0 x 25mm

Category Router Bits & Accessories
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:D: 10mm (25/64in)C: 25mmOL: 57mmShank Diameter: 1/4in
Trend

Trend 3/61 x 1/4 TCT Two Flute Cutter 10.0 x 25mm

Product Code: TRE36114TC
Category Router Bits & Accessories
Manufacturer Trend
Select options to purchase. Prices from
£24.68 Pack of 1
/
incl. VAT £29.62
RRP £35.44
30%
- +
Add to favourites
Compare
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Description

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.

Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

This Trend 3/61 x 1/4 TCT Two Flute Cutter has the following specification:

D: 10mm (25/64in)
C: 25mm
OL: 57mm
Shank Diameter: 1/4in

Specifications

Catalog Page Number

598

Brand

TREND

Categories

Power Tool Accessories

Category

Router Bits & Accessories

Country Of Origin

Taiwan

Cut Depth

25mm

Cut Diameter

10.0mm

Form

Two Flute Cutters

Manufacturer

TREND

Shank

1/4in

Type

Router Bits & Accessories

Kyocera
Ricoh
HP
Samsung
Fellowes
Black n Red
Leitz
Rexel
ZOLL
Renz
Cardiac Science
HSM SECURIO
SureSan
SEARCH ×