0 £0.00
products in your basketto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
To basket
Quote Me
Checkout
0
Trend

Trend C140 x 1/4 TCT Bearing Guided Corner Bead 3.2mm Radius

Category Router Bits & Accessories
Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in
Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in
Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in
Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in
Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in
Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in
Trend

Trend C140 x 1/4 TCT Bearing Guided Corner Bead 3.2mm Radius

Product Code: TREC14014TC
Category Router Bits & Accessories
Manufacturer Trend
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Specifications

Brand

TREND

Categories

Power Tool Accessories

Category

Router Bits & Accessories

Country Of Origin

Taiwan

Cut Depth

14.0mm

Cut Diameter

22.3mm

Form

Ovolo & Round Over Cutters

Manufacturer

TREND

Radius

3.2mm

Shank

1/4in

Type

Router Bits & Accessories

Description

Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.

For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.

This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:

Cutting Diameter: 22.3mm (7/8in)
Cutting Depth: 14mm (35/64in)
Bearing: 12.7mm
Radius: 3.2mm
Overall Length: 65.5mm
Shank Diameter: 1/4in
Select options to purchase. Prices from
£37.31 Pack of 1
/
incl. VAT £44.77
RRP £53.59
30%
- +
Add to favourites
Compare
Trend

Trend C140 x 1/4 TCT Bearing Guided Corner Bead 3.2mm Radius

Category Router Bits & Accessories
Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in
Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in
Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in
Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in
Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in
Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in
Trend

Trend C140 x 1/4 TCT Bearing Guided Corner Bead 3.2mm Radius

Product Code: TREC14014TC
Category Router Bits & Accessories
Manufacturer Trend
Select options to purchase. Prices from
£37.31 Pack of 1
/
incl. VAT £44.77
RRP £53.59
30%
- +
Add to favourites
Compare
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Description

Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90??. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity.

For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics.

This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification:

Cutting Diameter: 22.3mm (7/8in)
Cutting Depth: 14mm (35/64in)
Bearing: 12.7mm
Radius: 3.2mm
Overall Length: 65.5mm
Shank Diameter: 1/4in

Specifications

Brand

TREND

Categories

Power Tool Accessories

Category

Router Bits & Accessories

Country Of Origin

Taiwan

Cut Depth

14.0mm

Cut Diameter

22.3mm

Form

Ovolo & Round Over Cutters

Manufacturer

TREND

Radius

3.2mm

Shank

1/4in

Type

Router Bits & Accessories

Kyocera
Ricoh
HP
Samsung
Fellowes
Black n Red
Leitz
Rexel
ZOLL
Renz
Cardiac Science
HSM SECURIO
SureSan
SEARCH ×