0 £0.00
products in your basketto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
To basket
Quote Me
Checkout
0
Trend

Trend C145 x 1/4 TCT Bearing Guided Slotting Cutter 6.3mm

Category Router Bits & Accessories
This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials.The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels.The slot dimension is matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. This Trend Craft Pro has a 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices.D: 31.8 mm.C: 1/4 inch.C: 6.3 mm.B: 12.7 mm.E: 9.5 mm.OL: 65 mm.Specification:Shank Diameter: 1/4 in. This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials.The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels.The slot dimension is matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. This Trend Craft Pro has a 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices.D: 31.8 mm.C: 1/4 inch.C: 6.3 mm.B: 12.7 mm.E: 9.5 mm.OL: 65 mm.Specification:Shank Diameter: 1/4 in.
This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials.The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels.The slot dimension is matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. This Trend Craft Pro has a 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices.D: 31.8 mm.C: 1/4 inch.C: 6.3 mm.B: 12.7 mm.E: 9.5 mm.OL: 65 mm.Specification:Shank Diameter: 1/4 in. This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials.The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels.The slot dimension is matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. This Trend Craft Pro has a 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices.D: 31.8 mm.C: 1/4 inch.C: 6.3 mm.B: 12.7 mm.E: 9.5 mm.OL: 65 mm.Specification:Shank Diameter: 1/4 in.
This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials.The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels.The slot dimension is matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. This Trend Craft Pro has a 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices.D: 31.8 mm.C: 1/4 inch.C: 6.3 mm.B: 12.7 mm.E: 9.5 mm.OL: 65 mm.Specification:Shank Diameter: 1/4 in. This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials.The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels.The slot dimension is matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. This Trend Craft Pro has a 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices.D: 31.8 mm.C: 1/4 inch.C: 6.3 mm.B: 12.7 mm.E: 9.5 mm.OL: 65 mm.Specification:Shank Diameter: 1/4 in.
Trend

Trend C145 x 1/4 TCT Bearing Guided Slotting Cutter 6.3mm

Product Code: TREC14514TC
Category Router Bits & Accessories
Manufacturer Trend
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Specifications

Catalog Page Number

603

Brand

TREND

Categories

Power Tool Accessories

Category

Router Bits & Accessories

Country Of Origin

Taiwan

Cut Depth

6mm

Cut Diameter

31.8mm

Form

Slot Cutters

Manufacturer

TREND

Shank

1/4in

Type

Router Bits & Accessories

Description

This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials.
The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels.
The slot dimension is matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.
This Trend Craft Pro has a 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices.

D: 31.8 mm.
C: 1/4 inch.
C: 6.3 mm.
B: 12.7 mm.
E: 9.5 mm.
OL: 65 mm.

Specification:

Shank Diameter: 1/4 in.
Select options to purchase. Prices from
£24.06 Pack of 1
/
incl. VAT £28.87
RRP £34.58
30%
- +
Add to favourites
Compare
Trend

Trend C145 x 1/4 TCT Bearing Guided Slotting Cutter 6.3mm

Category Router Bits & Accessories
This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials.The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels.The slot dimension is matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. This Trend Craft Pro has a 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices.D: 31.8 mm.C: 1/4 inch.C: 6.3 mm.B: 12.7 mm.E: 9.5 mm.OL: 65 mm.Specification:Shank Diameter: 1/4 in. This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials.The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels.The slot dimension is matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. This Trend Craft Pro has a 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices.D: 31.8 mm.C: 1/4 inch.C: 6.3 mm.B: 12.7 mm.E: 9.5 mm.OL: 65 mm.Specification:Shank Diameter: 1/4 in.
This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials.The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels.The slot dimension is matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. This Trend Craft Pro has a 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices.D: 31.8 mm.C: 1/4 inch.C: 6.3 mm.B: 12.7 mm.E: 9.5 mm.OL: 65 mm.Specification:Shank Diameter: 1/4 in. This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials.The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels.The slot dimension is matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. This Trend Craft Pro has a 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices.D: 31.8 mm.C: 1/4 inch.C: 6.3 mm.B: 12.7 mm.E: 9.5 mm.OL: 65 mm.Specification:Shank Diameter: 1/4 in.
This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials.The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels.The slot dimension is matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. This Trend Craft Pro has a 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices.D: 31.8 mm.C: 1/4 inch.C: 6.3 mm.B: 12.7 mm.E: 9.5 mm.OL: 65 mm.Specification:Shank Diameter: 1/4 in. This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials.The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels.The slot dimension is matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. This Trend Craft Pro has a 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices.D: 31.8 mm.C: 1/4 inch.C: 6.3 mm.B: 12.7 mm.E: 9.5 mm.OL: 65 mm.Specification:Shank Diameter: 1/4 in.
Trend

Trend C145 x 1/4 TCT Bearing Guided Slotting Cutter 6.3mm

Product Code: TREC14514TC
Category Router Bits & Accessories
Manufacturer Trend
Select options to purchase. Prices from
£24.06 Pack of 1
/
incl. VAT £28.87
RRP £34.58
30%
- +
Add to favourites
Compare
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Description

This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials.
The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels.
The slot dimension is matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.
This Trend Craft Pro has a 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices.

D: 31.8 mm.
C: 1/4 inch.
C: 6.3 mm.
B: 12.7 mm.
E: 9.5 mm.
OL: 65 mm.

Specification:

Shank Diameter: 1/4 in.

Specifications

Catalog Page Number

603

Brand

TREND

Categories

Power Tool Accessories

Category

Router Bits & Accessories

Country Of Origin

Taiwan

Cut Depth

6mm

Cut Diameter

31.8mm

Form

Slot Cutters

Manufacturer

TREND

Shank

1/4in

Type

Router Bits & Accessories

Kyocera
Ricoh
HP
Samsung
Fellowes
Black n Red
Leitz
Rexel
ZOLL
Renz
Cardiac Science
HSM SECURIO
SureSan
SEARCH ×