0 £0.00
products in your basketto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
To basket
Quote Me
Checkout
0
Trend

Trend CR/KFP/5 Kitchen Fitters Set, 5 Piece

Category Router Bits & Accessories
The Trend CR/KFP/5 Kitchen Fitters Set contains 5 x C153DX1/2TC CraftPro Two Flute Cutters.The C153DX1/2TC CraftPro Two Flute Cutter is suitable for routing post-formed joints with worktop jigs in tops up to 40mm thick. It cuts crisp and clean precision fit joints every time. Especially suited for use on abrasive chipboard core laminate faced worktops.With a carbide centre tip profile, the cutter is ideal for plunging work on abrasive materials with jigs for hob and sink cut-outs. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. A 1/2in shank allows use in bigger routers and for heavier applications. 'K' marked to ensure safe working practices. The Trend CR/KFP/5 Kitchen Fitters Set contains 5 x C153DX1/2TC CraftPro Two Flute Cutters.The C153DX1/2TC CraftPro Two Flute Cutter is suitable for routing post-formed joints with worktop jigs in tops up to 40mm thick. It cuts crisp and clean precision fit joints every time. Especially suited for use on abrasive chipboard core laminate faced worktops.With a carbide centre tip profile, the cutter is ideal for plunging work on abrasive materials with jigs for hob and sink cut-outs. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. A 1/2in shank allows use in bigger routers and for heavier applications. 'K' marked to ensure safe working practices.
The Trend CR/KFP/5 Kitchen Fitters Set contains 5 x C153DX1/2TC CraftPro Two Flute Cutters.The C153DX1/2TC CraftPro Two Flute Cutter is suitable for routing post-formed joints with worktop jigs in tops up to 40mm thick. It cuts crisp and clean precision fit joints every time. Especially suited for use on abrasive chipboard core laminate faced worktops.With a carbide centre tip profile, the cutter is ideal for plunging work on abrasive materials with jigs for hob and sink cut-outs. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. A 1/2in shank allows use in bigger routers and for heavier applications. 'K' marked to ensure safe working practices. The Trend CR/KFP/5 Kitchen Fitters Set contains 5 x C153DX1/2TC CraftPro Two Flute Cutters.The C153DX1/2TC CraftPro Two Flute Cutter is suitable for routing post-formed joints with worktop jigs in tops up to 40mm thick. It cuts crisp and clean precision fit joints every time. Especially suited for use on abrasive chipboard core laminate faced worktops.With a carbide centre tip profile, the cutter is ideal for plunging work on abrasive materials with jigs for hob and sink cut-outs. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. A 1/2in shank allows use in bigger routers and for heavier applications. 'K' marked to ensure safe working practices.
The Trend CR/KFP/5 Kitchen Fitters Set contains 5 x C153DX1/2TC CraftPro Two Flute Cutters.The C153DX1/2TC CraftPro Two Flute Cutter is suitable for routing post-formed joints with worktop jigs in tops up to 40mm thick. It cuts crisp and clean precision fit joints every time. Especially suited for use on abrasive chipboard core laminate faced worktops.With a carbide centre tip profile, the cutter is ideal for plunging work on abrasive materials with jigs for hob and sink cut-outs. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. A 1/2in shank allows use in bigger routers and for heavier applications. 'K' marked to ensure safe working practices. The Trend CR/KFP/5 Kitchen Fitters Set contains 5 x C153DX1/2TC CraftPro Two Flute Cutters.The C153DX1/2TC CraftPro Two Flute Cutter is suitable for routing post-formed joints with worktop jigs in tops up to 40mm thick. It cuts crisp and clean precision fit joints every time. Especially suited for use on abrasive chipboard core laminate faced worktops.With a carbide centre tip profile, the cutter is ideal for plunging work on abrasive materials with jigs for hob and sink cut-outs. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. A 1/2in shank allows use in bigger routers and for heavier applications. 'K' marked to ensure safe working practices.
Trend

Trend CR/KFP/5 Kitchen Fitters Set, 5 Piece

Product Code: TRECRKFP5
Category Router Bits & Accessories
Manufacturer Trend
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Specifications

Brand

TREND

Categories

Power Tool Accessories

Category

Router Bits & Accessories

Cut Depth

50mm

Cut Diameter

12.7mm

Form

Two Flute Cutters

Manufacturer

TREND

Shank

1/2in

Type

Router Bits & Accessories

Description

The Trend CR/KFP/5 Kitchen Fitters Set contains 5 x C153DX1/2TC CraftPro Two Flute Cutters.

The C153DX1/2TC CraftPro Two Flute Cutter is suitable for routing post-formed joints with worktop jigs in tops up to 40mm thick. It cuts crisp and clean precision fit joints every time. Especially suited for use on abrasive chipboard core laminate faced worktops.

With a carbide centre tip profile, the cutter is ideal for plunging work on abrasive materials with jigs for hob and sink cut-outs. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. A 1/2in shank allows use in bigger routers and for heavier applications. 'K' marked to ensure safe working practices.
Select options to purchase. Prices from
£122.38 Pack of 1
/
incl. VAT £146.86
%
- +
Add to favourites
Compare
Trend

Trend CR/KFP/5 Kitchen Fitters Set, 5 Piece

Category Router Bits & Accessories
The Trend CR/KFP/5 Kitchen Fitters Set contains 5 x C153DX1/2TC CraftPro Two Flute Cutters.The C153DX1/2TC CraftPro Two Flute Cutter is suitable for routing post-formed joints with worktop jigs in tops up to 40mm thick. It cuts crisp and clean precision fit joints every time. Especially suited for use on abrasive chipboard core laminate faced worktops.With a carbide centre tip profile, the cutter is ideal for plunging work on abrasive materials with jigs for hob and sink cut-outs. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. A 1/2in shank allows use in bigger routers and for heavier applications. 'K' marked to ensure safe working practices. The Trend CR/KFP/5 Kitchen Fitters Set contains 5 x C153DX1/2TC CraftPro Two Flute Cutters.The C153DX1/2TC CraftPro Two Flute Cutter is suitable for routing post-formed joints with worktop jigs in tops up to 40mm thick. It cuts crisp and clean precision fit joints every time. Especially suited for use on abrasive chipboard core laminate faced worktops.With a carbide centre tip profile, the cutter is ideal for plunging work on abrasive materials with jigs for hob and sink cut-outs. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. A 1/2in shank allows use in bigger routers and for heavier applications. 'K' marked to ensure safe working practices.
The Trend CR/KFP/5 Kitchen Fitters Set contains 5 x C153DX1/2TC CraftPro Two Flute Cutters.The C153DX1/2TC CraftPro Two Flute Cutter is suitable for routing post-formed joints with worktop jigs in tops up to 40mm thick. It cuts crisp and clean precision fit joints every time. Especially suited for use on abrasive chipboard core laminate faced worktops.With a carbide centre tip profile, the cutter is ideal for plunging work on abrasive materials with jigs for hob and sink cut-outs. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. A 1/2in shank allows use in bigger routers and for heavier applications. 'K' marked to ensure safe working practices. The Trend CR/KFP/5 Kitchen Fitters Set contains 5 x C153DX1/2TC CraftPro Two Flute Cutters.The C153DX1/2TC CraftPro Two Flute Cutter is suitable for routing post-formed joints with worktop jigs in tops up to 40mm thick. It cuts crisp and clean precision fit joints every time. Especially suited for use on abrasive chipboard core laminate faced worktops.With a carbide centre tip profile, the cutter is ideal for plunging work on abrasive materials with jigs for hob and sink cut-outs. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. A 1/2in shank allows use in bigger routers and for heavier applications. 'K' marked to ensure safe working practices.
The Trend CR/KFP/5 Kitchen Fitters Set contains 5 x C153DX1/2TC CraftPro Two Flute Cutters.The C153DX1/2TC CraftPro Two Flute Cutter is suitable for routing post-formed joints with worktop jigs in tops up to 40mm thick. It cuts crisp and clean precision fit joints every time. Especially suited for use on abrasive chipboard core laminate faced worktops.With a carbide centre tip profile, the cutter is ideal for plunging work on abrasive materials with jigs for hob and sink cut-outs. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. A 1/2in shank allows use in bigger routers and for heavier applications. 'K' marked to ensure safe working practices. The Trend CR/KFP/5 Kitchen Fitters Set contains 5 x C153DX1/2TC CraftPro Two Flute Cutters.The C153DX1/2TC CraftPro Two Flute Cutter is suitable for routing post-formed joints with worktop jigs in tops up to 40mm thick. It cuts crisp and clean precision fit joints every time. Especially suited for use on abrasive chipboard core laminate faced worktops.With a carbide centre tip profile, the cutter is ideal for plunging work on abrasive materials with jigs for hob and sink cut-outs. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. A 1/2in shank allows use in bigger routers and for heavier applications. 'K' marked to ensure safe working practices.
Trend

Trend CR/KFP/5 Kitchen Fitters Set, 5 Piece

Product Code: TRECRKFP5
Category Router Bits & Accessories
Manufacturer Trend
Select options to purchase. Prices from
£122.38 Pack of 1
/
incl. VAT £146.86
%
- +
Add to favourites
Compare
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Description

The Trend CR/KFP/5 Kitchen Fitters Set contains 5 x C153DX1/2TC CraftPro Two Flute Cutters.

The C153DX1/2TC CraftPro Two Flute Cutter is suitable for routing post-formed joints with worktop jigs in tops up to 40mm thick. It cuts crisp and clean precision fit joints every time. Especially suited for use on abrasive chipboard core laminate faced worktops.

With a carbide centre tip profile, the cutter is ideal for plunging work on abrasive materials with jigs for hob and sink cut-outs. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. A 1/2in shank allows use in bigger routers and for heavier applications. 'K' marked to ensure safe working practices.

Specifications

Brand

TREND

Categories

Power Tool Accessories

Category

Router Bits & Accessories

Cut Depth

50mm

Cut Diameter

12.7mm

Form

Two Flute Cutters

Manufacturer

TREND

Shank

1/2in

Type

Router Bits & Accessories

Kyocera
Ricoh
HP
Samsung
Fellowes
Black n Red
Leitz
Rexel
ZOLL
Renz
Cardiac Science
HSM SECURIO
SureSan
SEARCH ×