0 £0.00
products in your basketto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…

Trend T421/35 x 1/4 TCT Hinge Sinking Bit 35mm Diameter

The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in
The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in
The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in

Trend T421/35 x 1/4 TCT Hinge Sinking Bit 35mm Diameter

Product Code: TRET4213514T
Manufacturer Trend
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Specifications

Catalog Page Number

601

Brand

TREND

Categories

Power Tool Accessories

Category

Router Bits & Accessories

Country Of Origin

Taiwan

Cut Diameter

35.0mm

Form

Hinge Bits

Manufacturer

TREND

Shank

1/4in

Type

Router Bits & Accessories

Description

The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.
This bit is best suited for use on thinner section laminate covered board.

Diameter - 35mm
Shank - 1/4in
Select options to purchase. Prices from
£32.26 Pack of 1
/
incl. VAT £38.71
%
- +
Compare

Trend T421/35 x 1/4 TCT Hinge Sinking Bit 35mm Diameter

The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in
The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in
The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in

Trend T421/35 x 1/4 TCT Hinge Sinking Bit 35mm Diameter

Product Code: TRET4213514T
Manufacturer Trend
Select options to purchase. Prices from
£32.26 Pack of 1
/
incl. VAT £38.71
%
- +
Compare
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Description

The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.
This bit is best suited for use on thinner section laminate covered board.

Diameter - 35mm
Shank - 1/4in

Specifications

Catalog Page Number

601

Brand

TREND

Categories

Power Tool Accessories

Category

Router Bits & Accessories

Country Of Origin

Taiwan

Cut Diameter

35.0mm

Form

Hinge Bits

Manufacturer

TREND

Shank

1/4in

Type

Router Bits & Accessories

SEARCH ×