0 £0.00
products in your basketto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…
To basket
Quote Me
Checkout
0
Trend

Trend T46/01 x 1/4 TCT 90?? Template Profiler 12.7 x 25mm

Category Router Bits & Accessories
Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90?? D = 12.7 mmC = 25 mm Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90?? D = 12.7 mmC = 25 mm
Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90?? D = 12.7 mmC = 25 mm Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90?? D = 12.7 mmC = 25 mm
Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90?? D = 12.7 mmC = 25 mm Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90?? D = 12.7 mmC = 25 mm
Trend

Trend T46/01 x 1/4 TCT 90?? Template Profiler 12.7 x 25mm

Product Code: TRET460114TC
Category Router Bits & Accessories
Manufacturer Trend
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Specifications

Catalog Page Number

599

Brand

TREND

Categories

Power Tool Accessories

Category

Router Bits & Accessories

Country Of Origin

Taiwan

Cut Depth

25.0mm

Cut Diameter

12.7mm

Form

Template Profilers

Manufacturer

TREND

Shank

1/4in

Type

Router Bits & Accessories

Description

Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.

Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.

Uses:
Trimming plastic or plywood overlay.
Copy profiling - use the bearing to follow a template or base edge of board.

A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.

Tooling Tungsten Carbide
1/2in Shank.

Tooling Tungsten Carbide
1/4in Shank.

Angle A = 90??
D = 12.7 mm
C = 25 mm
Select options to purchase. Prices from
£25.29 Pack of 1
/
incl. VAT £30.35
RRP £36.30
30%
- +
Add to favourites
Compare
Trend

Trend T46/01 x 1/4 TCT 90?? Template Profiler 12.7 x 25mm

Category Router Bits & Accessories
Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90?? D = 12.7 mmC = 25 mm Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90?? D = 12.7 mmC = 25 mm
Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90?? D = 12.7 mmC = 25 mm Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90?? D = 12.7 mmC = 25 mm
Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90?? D = 12.7 mmC = 25 mm Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90?? D = 12.7 mmC = 25 mm
Trend

Trend T46/01 x 1/4 TCT 90?? Template Profiler 12.7 x 25mm

Product Code: TRET460114TC
Category Router Bits & Accessories
Manufacturer Trend
Select options to purchase. Prices from
£25.29 Pack of 1
/
incl. VAT £30.35
RRP £36.30
30%
- +
Add to favourites
Compare
Special Shipping Charge Applies
Free Delivery on orders over £75

Free Delivery on most orders over £75*

(*Excl. special items where indicated). See delivery policy for details

Estimated Delivery: 1 to 3 Business Days*

(*Unless stated on product details)

Description

Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.

Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.

Uses:
Trimming plastic or plywood overlay.
Copy profiling - use the bearing to follow a template or base edge of board.

A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.

Tooling Tungsten Carbide
1/2in Shank.

Tooling Tungsten Carbide
1/4in Shank.

Angle A = 90??
D = 12.7 mm
C = 25 mm

Specifications

Catalog Page Number

599

Brand

TREND

Categories

Power Tool Accessories

Category

Router Bits & Accessories

Country Of Origin

Taiwan

Cut Depth

25.0mm

Cut Diameter

12.7mm

Form

Template Profilers

Manufacturer

TREND

Shank

1/4in

Type

Router Bits & Accessories

Kyocera
Ricoh
HP
Samsung
Fellowes
Black n Red
Leitz
Rexel
ZOLL
Renz
Cardiac Science
HSM SECURIO
SureSan
SEARCH ×